| LONG DESCRIPTION |
PRE ASSEMBLED FRP DROP DOWN MODULAR TOILET FOR MODEL RAKE (LACCN) COACHESTOSPECN. MDTS-214, REV.05. AND AS PER THE REQUIREMENTS GIVEN BELOW:1)SCOPE OFSUPPLY OF FRP LAVATORY MODULE AND AMENITY FITTINGS SHALL BEAS PERCLAUSE 3.I (iv)OF SPECN MDTS-214, REV-05.2)ALL ITEMS OF LAVATORY MODULES TO DRG. No. 110113.0.30.000.013, ALT-DR7 WITHANX-1, 1 10113.0.30.000.015, ALT - DR6 WITHANX-1 AND LE63110, ALT - hWITH ANX-1 SHOULD BE SUPPLIED AND INSTALLED BY THESUPPLIER.3)ALL ITEMS OF PIPE CONNECTIONS INSIDE LAVATORY TO DRG. No. LE63157,ALT- i,LE63160, ALT-j AND LE63161, ALT- d = EACH 1 No. SHOULD BE SUPPLIEDANDINSTALLEDBY THE SUPPLIER (CLAUSE- 4 OF MDTS-214, REV-05 IS NOTAPPLICABLE)4)PLUMBING ARRANGEMENT TO AUXILIARY WATER TANK FROM UNDER THE COACHTODRG. No.LE63227, ALT-c = 2 Nos. SHOULD BE SUPPLIED AND INSTALLED BY THESUPPLIER.5)THE FOLLOWING CLAUSES OF SPECN.MDTS-214, REV.05 OF FRP DROP DOWNMODULARTOILET TO BE READ AS :CLAUSE 2(c)FRP PANELS (USING POLYSTER RESIN) USEDIN RAILWAY PASSENGER COACHES ASPER ICFTECHNICAL SPECIFICATION ICF/MD/SPEC.167A,REV.05.CLAUSE 5.1THE TENDERER SHALL HAVE PLANT, MACHINERY AND INFRASTRUCTUREREQUIREMENTS AS PERCLAUSE 8.1 OF ICF/MD/SPEC.167A, REV.05.CLAUSE 5.2THE TENDERERSHALL HAVE TESTING FACILITIES FOR FRP COMPONENTS AS PER CLAUSE 9.0OFICF/MD/SPEC.167A, REV.05.6)PACKING CONDITION AS PER DOC.NO.PI111.7)THE MATERIALHANDLING EQUIPMENT FOR LOADING OF MODULES WILL BE SPARED BY ICF.8) AFTER FITMENTOF TOILET MODULE, THE ENTIRE SURFACE (BOTH INNER ANDOUTERVISIBLE AREAS INCLUDINGPAN / COMMODE AND WASH BASIN) SHALL BE APPLIEDANTI-GRAFFITI COATING. THEAPPLICATION TESTING PROCEDURE SHALL BE FOLLOWED ASPERRDSO/SPEC.M C/PCN/127-2009, REV-01. |
